Home Installing WebPort WebPort User Interface Technical Reference Glossary Search 

Contents

Configuring Routing Settings for the WebPort

You may port forward, add gateway rules, and set up network address translation on a WebPort. Each of these options is covered separately in the help under individual port forwarding, gateway, and network address translation topics.

NOTE

If you have the Ethernet-only WebPort, the CELL to LAN checkboxes are unchecked and disabled.

  • For more information about how to set up port forwarding, use the link to Adding Routing Settings in the table below.
  • To configure gateway settings, use the link to Configuring Gateway Settings for the WebPort link provided below.
  • To configure network address translation, use the Configuring Network Address Translation Settings for the WebPort link provided below.

To configure any of the routing options:

  1. From the Configuration Work Area, select the following icon: This is a picture of the dialog. The following dialog appears: This is a picture of the dialog.
  2. View or specify the following options:
    Icon Function Access
    This is a picture of the dialog. Add port forwarding settings: Adding Port Forwarding Settings
    This is a picture of the dialog. Modify port forwarding settings: Modifying Port Forwarding Settings
    This is a picture of the
                                        dialog. Delete port forwarding settings from the WebPort: Deleting Port Forwarding Settings
    • Submit. Saves changes on WebPort and exits.
    • Cancel. Exits without saving changes on WebPort.
  3. To configure Gateway settings for the WebPort, see Configuring Gateway Settings for the WebPort
  4. To configure Network Address Translation settings for the WebPort, see Configuring Network Address Translation Settings for the WebPort

Contents Next